beautypg.com

Codes used in reports, Result codes, Communication codes – Oki 56801 User Manual

Page 70

background image

64

Codes Used In Reports

Result Codes

The following codes indicate the results of communications.

Communication Codes

The following codes indicate the communication mode used for a
communication.

Code

Description

BUSY

The other machine’s line was busy or there was no
answer.

CANCL

A message was erased after being held in memory for
10 days.

COMP.

A multiple-location transmission was completed.

COVER

The fax machine’s cover was opened during the
communication.

NO

The transmission or reception failed due to a
communication error.

OK

The communication was completed successfully.

PAPER

The communication failed because the receiving
machine ran out of paper.

PUNIT

Indicates a problem with the printing unit. Contact
your supplier.

R_JAM

A paper jam occurred in your fax machine while it
was receiving a fax, and your fax machine was unable
to receive the entire message in memory.

S_JAM

A document jam occurred in your fax machine.

STOP

The Stop key was pressed, ending the communication
session.

Code

Description

B.C.

Multiple-location transmission (broadcast).

CONF=**

Confidential reception (** is the box number)

TX

A communication initiated by your fax machine.

RX

A communication initiated by a remote fax machine.

POLL RX

One-time standard polling reception.

POLL=**

Bulletin polling transmission (** is the box number)

POLL TX

Polling transmission.

FWD-T

Forward transmission

FWD-R

Forward reception