Oki 56801 User Manual

Page 50

You can send a delayed fax either from the document feeder or
from memory. Refer to the table below to decide which method
you want to use.

Sending Delayed Faxes

1. Load your documents.
2. Press the

Select Function

key.

3. Press the

1/Delayed TX

One-Touch key. The display shows

DELAYED TX

and today’s date.

4. If transmission is to occur today press

YES

key and go to

step 7. If transmission is to occur at a later date press the

key.

5. Using the numeric keypad, enter the date on which you wish

the transmission to begin.

6. Press the

YES

key. The display shows

DELAYED TX TIME.

7. Using the numeric keypad, enter the time on which you wish

the transmission to begin.

Note: Enter the time using a 24-hour clock, i.e., 8:00 a.m. would

be entered as 08:00 and 8:00 p.m. would be entered as
20:00.

8. Press the

YES

key and the display shows

SELECT

LOCATION(S)

9. Select a location. Refer to the instructions below.

10. Press

Start

• If the

MEM/FEEDER SW

is on

MEM

, the machine will begin

scanning. After scanning, the machine will stand by for the
delayed TX.

• If the

MEM/FEEDER SW

is on

FEED

, the machine will stand by

for the delayed TX.

Canceling Delayed Transmissions

To cancel a delayed transmission from the document feeder or
from memory before it has been sent, follow the instructions
below.

1. Press the

Stop

key. The display shows

COMMUNICATION

CANCEL

Delayed TX Features &
Limitations

From Feeder From Memory

Number of locations

One

Multiple

Number of delayed faxes in your fax
machine at any one time

One

Up to twenty

Fax machine can be used for other
transmissions while a delayed fax is
waiting to be sent?

Yes

To Do This

Do This

One-Touch key

Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.

Auto Dial number

Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.

A number dialed on the
numeric keypad

Dial as you would on a normal telephone.