Roland KR105 - Manual (Page 97)

97
User Program Registration
User Program Registration
■ Coping Sets of User Programs
Stored in the User Memory to
Disks
You can take User Program sets saved in user memory and
copy them to floppy disks.
In this case, in the Copy User Programs screen in Step 4
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KR105 to copy the User
Program set in the user memory to the floppy disk.
The rest of the procedure is identical to that used for copying
sets of User Program set from disks to user memory.
Using the Pedal to Switch
User Programs
You can assign the function of the sequential switching of
User Programs to the pedal. That way, each time you depress
the pedal, the KR105 switches to the next User Program.
Great for use in concerts and similar situations, this allows
you to prepare and save your User Programs in the sequence
they are to be used, and then call up User Programs in the
appropriate order while you perform, simply by depressing
the pedal.
1. Press the [User Program] button.
2.
Touch in the lower part of the screen.
A “PEDAL screen” like the following appears.
■ Selecting the Pedal Used for
Switching Settings (Pedal Shift)
3. Touch to select the setting.
Touch to return to the User Program screen.
■ Sequential Loading of User
Program Sets (Load Next)
When using the pedal to switch your User Programs,
you can also call up User Programs sequentially. This
feature is called the “Load Next” function.
3.
Touch to select the setting.
Touch to return to the User Program screen.
Display Explanation
OFF
You can use a function assigned to the
pedal.
Left Pedal
The left pedal is dedicated to switching
User Programs.The function assigned to
the left pedal cannot be used.
Center Pedal
The center pedal is dedicated to
switching User Programs.The function
assigned to the center pedal cannot be
used.
Display Explanation
OFF
Switches Load Next off. The pedal does
not allow you to select User Programs.
ON
Switches Load Next on. The next press of
the pedal after the 36th User Program has
been called up does nothing.
KR105.book Page 97 Tuesday, June 7, 2005 5:25 PM