Roland KR105 - Manual (Page 153)

153
Appendices
Appendices
Accompaniment
tempo becomes
unstable
In certain cases, such as when playing
Music Styles on floppy disks, the
accompaniment may lag when excessive
amounts of performance data are used.
Song doesn’t play back correctly
Song doesn’t play
back
Does the screen indicate message, like “OK
to delete song?” (p. 75)
The internal songs cannot be played back
while recorded performance data remains
in the KR105’s memory. Try playing back
the song after deleting the performance
data.
Only the sound of a
particular
instrument in a
song does not play
Is the light for the Track button
extinguished? (p. 69)
If the button light is out, the music on that
track is not heard. Press the track button so
the light is illuminated.
Have song settings been changed for each
Part on the 16-Track sequencer screen (p.
100)?
Pressing the [
(Reset)] button
doesn’t return to
the beginning of
the song
Some music files may contain settings that
stop play at a point partway through the
song. Press the [ ( Reset)] button several
times more to return to the beginning of the
tune.
Has a Marker placed in the song? (p. 70)
The [ (Fwd)]
and [ (Bwd)]
buttons don’t work
The fast-forward and reverse buttons are
ignored while music files is being read in.
Wait until processing finishes.
If you attempt to play back performance
data that contains more data than the entire
capacity of the KR105’s memory, you may
find that operations other than playback
(such as rewind or fast forward) become
unavailable.
There is a slight
delay before
playback of a song
starts
There are two types of SMF music files:
format 0 and format 1. If the song uses SMF
format 1 data, there will be a slight delay
until playback starts. Refer to the booklet
that came with the music files you’re using
to determine the format type.
Case Cause/Remedy
Lyrics are not
indicated properly
in the display
With some music files, the lyrics cannot be
displayed correctly.
If you press a button while the lyrics are
being shown in the display, the lyrics will
disappear. To recall them, touch in
the Piano or Basic screen, or press the
[ (Play/Stop)] button.
In the notation screen, some lyrics or notes
could extend beyond the edges of the
screen, and not be displayed.
Notation is not
indicated properly
in the display
If you select a part that does not contain
performance data, notes will not be
displayed in the notation. Change the part
that is displayed (p. 64).
The notation screen feature is particularly
unsuitable for the display of difficult,
complex musical works that demand
accurate notation. Refer to “Notes
Regarding the Score Display” (p. 62).
In the notation screen, some lyrics or notes
could extend beyond the edges of the
screen, and not be displayed.
Song becomes
unstable
In certain cases, such as when playing
songs on floppy disk, the song may lag
when excessive amounts of performance
data are used.
Unable to play
back internal
songs
Have you pressed the remote control’s
[MUTE] button, muting the sound?
Can’t record
Can’t record
Has one of the track buttons for recording
been selected? (p. 81)
Has the setting for “Punch-in Recording”
(p. 105) or “Tempo Recording” (p. 114)
been made?
Select the replace recording method (p.
103).
It is not possible to record while the
notation is being generated. Once the unit
has finished generating the notation (i.e.,
when the measure number in the screen is
no longer highlighted), try the operation
once again.
Case Cause/Remedy
KR105.book Page 153 Tuesday, June 7, 2005 5:25 PM