Adjusting the sound’s volume and brilliance, Connecting headphones, Adjusts the overall volume (p. 17) – Roland KR105 User Manual
Page 17: Adjusts the brightness of the sound (p. 17), A set of headphones can be connected here (p. 17), 17 before you start playing
17
Before You Start Playing
Before You
Start Playing
About the Adjuster
When you move the KR105 or if you feel that the pedals are
unstable, adjust the adjuster located below the pedals as
follows.
❍ Rotate the adjuster to lower it so that it is in firm contact
with the floor. If there is a gap between the pedals and
the floor, the pedals may be damaged. In particular
when placing the instrument on carpet, adjust this so
that the pedals firmly contact the floor.
Adjusting the Sound’s
Volume and Brilliance
Turn the [Volume] knob to adjust the overall volume.
Turn the [Brilliance] knob to adjust the brightness of
the sound.
Connecting Headphones
The KR105 has two jacks for plugging in headphones. This
allows two people to listen through headphones
simultaneously, making it very useful for lessons and when
performing piano pieces for four hands. Additionally, this
allows you to play without having to worry about bothering
others around you, even at night.
Plug the headphones into the Phones jack located at the
bottom left of the piano.
Connecting headphones will automatically mute the
sound from the internal speakers.
The headphone volume is adjusted by the [Volume]
knob of the KR105.
fig.00-04.e
NOTE
Use Stereo headphones.
Some Notes on Using Headphones
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• Connecting the headphones when the volume of
connected equipment is turned up may result in damage
to the headphones. Lower the volume on the KR105
before plugging in the headphones.
• Listening at excessively high volume levels will not only
damage the headphones, but may also cause hearing
loss. Use the headphones at a moderate volume level.
Adjuster
Phones jack x 2
KR105.book Page 17 Tuesday, June 7, 2005 5:25 PM