Roland KR105 - Manual (Page 96)

96
User Program Registration
User Program Registration
Deleting Saved User
Program Sets
You can delete individual User Program sets saved to floppy
disks or in user memory.
When deleting a set of User Programs on a floppy disk, first
insert the floppy disk in the disk drive.
→
For more on the use of the disk drive, refer to “Using Floppy
Disks” (p. 85).
1.
Press the [User Program] button.
2.
Touch .
3. Touch .
A “Delete User Program screen” like the following
appears.
fig.d-upgdel.eps_50
4. Touch or .
Touch if you are deleting User Programs from a
floppy disk; touch if you are deleting User
Programs from the user memory.
5.
Touch to select the set of User Programs to be
deleted.
6. Touch .
A screen like the one shown below appears.
fig.msg_filedel
7. Touch .
The selected User Programs are deleted.
Touching cancels deleting the file.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KR105’s internal memory, making it unusable.
Copying Sets of User Programs on
Disks to the User Memory
You can copy sets of User Programs saved on floppy disks
and to user memory.
You can also copy sets of User Programs saved in user
memory and to floppy disks.
1.
Insert the disk with the settings to be copied in the disk
drive.
2.
Touch the [User Program] button.
3. Touch .
4.
Touch .
A “Copy User Programs screen” like the following
appears.
fig.d-upgcopy.eps_50
Specifying the copy source
5.
Touch to select the set of User
Programs you want to copy.
When “All” is selected, all of the sets of User Programs
on the disk are copied to user memory.
Specifying the copy destination
6. Touch to select the copy destination
for the set of User Programs.
If a User Program name is displayed, already a User
Program saved to that number is already.
If you select a number with User Programs data, and
then copy data to that number, the previously saved
User Programs are deleted. If you do not want to delete
the saved User Programs, select a number in the save-
destination column for which no name is displayed.
7.
Touch .
The set of User Programs on the disk is saved to user
memory.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KR105’s internal memory, making it unusable.
KR105.book Page 96 Tuesday, June 7, 2005 5:25 PM