Roland KR105 - Manual (Page 132)

132
Various Settings
Changing the Settings for
One-Touch Piano
■ Procedure
1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Touch .
A “Functions screen” like the following appears.
fig.d-funcmenu2.eps_50
3.
Use <√><®> to selet the page that contains the
parameter you need.
4.
Touch the field of the parameter you want to set.
■ Lid: Adjusting the piano tone
With the KR105, you can simulate changes in tone of a
grand piano that come about when the piano’s lid is
opened or closed.
1.
After performing steps (1)~(3) above, touch to
jump to the following page:
2.
Use < ▲> and <▼> to adjust the amount of the
“opening” of the piano lid.
Each time you press the < ▲> button, the lid of the piano
shown on the screen will open more, creating a brighter
tone.
Each time you press the <
▼> button, the lid of the piano
shown on the screen will close more, creating a mellower
tone.
3.
Touch to return to the previous page.
■ Adjusting Resonance
(Resonance)
You can adjust the resonance (Sympathetic Resonance)
that becomes audible when the damper pedal is
depressed.
This setting is enabled only with the piano tones. You cannot set
this for other tones.
1.
After performing steps (1)~(3) on p. 132, touch
to jump to the following page:
2.
Use the on-screen slider icon or the dial to set the
desired resonance level.
3.
Touch to return to the previous page.
Repeat
When “Repeat” is turned ON
on the Marker screen (p. 72)
this specified whether the
count-in will sound each time
the range between the mark-
ers is repeated, or only the
first time.
First, Every
Parameter Name Value
KR105.book Page 132 Tuesday, June 7, 2005 5:25 PM