Roland KR105 - Manual (Page 24)

24
Performance
■ Using Keywords to Search for Tones (Tone Search)
You can search for tones that match the conditions you set for instrument or musical
style. You can also search the tones using the first character of the tone name.
1.
Press any Tone button.
The tone selection screen appears.
2.
Touch
The following “Tone Search” screen appears.
fig.d-tonesrch1.eps_60
Searching by Conditions
3.
Touch or , then use the dial to select the search
conditions.
4.
Touch
The search results appear in the display.
Touch the tone name to select the tone.
Touch button to return to the tone search screen.
Searching by Tone Name
3
Touch .
Touch to go to the condition search screen.
4.
Decide which character is to be used for the search.
The selected character appears in the middle of the screen.
Enter the character you’re searching for. For example, touching in succession
cycles you through the available choices in that character group (“A”
→”B”→”C”...).
Touching selects the type of character. Each time you touch , the
character switches between alphabets and numerals.
5.
Touch
The search results appear in the display.
Touch the tone name to select the Tone.
Touch several times to return to the Basic screen or the previous screen.
Condition Search screen Name Search screen
Touch here to switch these screens.
In condition search, tones
satisfying all of the selected
search criteria are sought.
KR105.book Page 24 Tuesday, June 7, 2005 5:25 PM