Raymarine GPS navigation - Manual (Page 60)

Designate a drive, path, and file for the data to be saved into. When the PC
Set, press WPT or the [OUTPUT ROUTE
to begin the memory transfer. The screen will show the message
UPLOADING"
willblinkonthescreenduring
the transfer process. The time to upload the data will depend on the number
of memory elements to transfer since up to 500 memories may be involved.
The UP LOAD IN G
message will go out when the transfer is completed.
MEMORYDATAINPUT
When you are ready to transfer the PC files of route plans or waypoints into
the NAV unit memories, please verify that the Data Input connections in the
power cable assembly are now connected to the PC
or COM2 port.
If everythings connected correctly, on the SYSTEM STATUS DATA
menu, press the
MEMORY DATA
IN The screen will show the
message " LOADING DATA
and
DOWNLOADING " will blink on the
screen during the transfer process. The time to download the data will depend
on the number of memory elements to transfer since up to 500 memories may
be involved and the transfer rate is one memory per second. The DOWN-
LOAD IN G
message will go out when the transfer is completed.
SYSTEM STATUS DATA
DATA OUT .
. MEMORY DATA OUT
q
M A I N
UNITS
l
.
NAV MENU
.
- -
STATUS
l
OFF
BEACON
OPERATION 3-47