Raymarine GPS navigation - Manual (Page 46)

When you have completed the entry of all the waypoints for a particular
route plan, just press The new route plan will be stored and
the display will promptly return to the last used Display mode.
3.9.2 Plans
Once a route plan has been made and saved into
memory, it can be recalled to Followed or to be Edited.
Press
The ROUTE MODE screen will
appear. Press
the FOLLOW ROUTE Selector screen appears
use the numeric keys to type the number of the route
plan to FOLLOW.
Example Press route plan 4.
SEQUENCE MODE
O F F
The FOLLOW ROUTE Setup screen appears. Once
route plans have been made, this screen permits en-
gagement of route sequence operation.
enables you to select the type of
sequencing mode between AUTO
or
MANUAL
. The other choice turns the
route sequence mode to OFF. Press to high-
light the desired sequencing mode.
AUTO SEQUENCING mode automatically steps from one to the
next when the arrival point has been detected.
In MANUAL SEQUENCING mode, the unit sounds the arrival and the
operator will manually press key to step to the next leg in the
route plan when it is safe to do so.
When the Sequencing mode is decided, the next
FOLLOW ROUTE 4
step is to decide to follow the route in the Forward
direction (first to last), or to follow the route in
SET ARRIVAL DISTANCE
verse (last to first). Just press
tion to advance to the next screen.
The last display shows the Arrival alarm distance that
PRESS ENT TO END
will be used to alert you as each is ap-
proached. You may accept the limit by pressing or enter a
limit of your choice on this screen. To enter a new arrival zone limit, type
the numbers of the desired limit distance and press
OPERATION 3-32