Raymarine GPS navigation - Manual (Page 30)

Press to return to the last selected display mode.
3.5.6 Simulator
PLOT MENU
The
NAV 398
includes a simulator mode which can
TRACK MENU
show simulated readouts on the various screens. There
MENU
are dynamic simulated screens for both loran and GPS
and can be used to demonstate navigation to waypoints
and following route plans.
To turn the simulator ON, be in Plot mode and press . Press
the to ON. Conversely, to turn OFF the simulator,
press a second time. When the simulator mode is
ON, “SIM” flashes on the various display screens.
3.5.7 Display Mode Operations
While you are on any of the POS, NAV, CDI, or PLOT display modes you
can perform the following operations:
l
Save an Event....Press key.
The Event message will appear and show the
saved memory #.
l
GO TO a the key.
Enter the using three digits and
then
3.5.7.1 Saving Events
You can save your present position for future use as a when you
are in any of display modes. The
EVENT
data will be stored sequentially into
the next available memory just like a normal waypoint.
Just press key. A m e s s a g e p r o m p t a p p e a r s t o p e r m i t y o u t o
select any other memory location. If no keys are pressed in live seconds,
the message will show the Event memory number and then disappear.
If during the 5 second period you type in a different memory number and
press the Event will be saved into the memory that you have
designated. If the memory number you typed was the same number as your
current destination, upon pressing the screen alerts you by
showing flashing. If you typed the memory number by mistake
and really don’t want to overwrite your destination point, just press the
If you DO want to update the current destination coordinates,
OPERATION 3-16