Raymarine GPS navigation - Manual (Page 48)

Press key puts the screen into an Edit condition so you can
INSERT or DELETE waypoints. Notice that two and
(insert) appear on the screen.
To INSERT a
For example; to insert a new between waypoints and
and until you see the leg containing Fr
036. If this is where you would like to
INSERT
the new waypoint, Press the
Type the new number ( # 002) and The
new will now appear between
To DELETE a
To delete a from a route plan, press key until the leg
where the shouid be deleted is displayed. For example; to delete
in the example above, you see Fr to
036. Then EDIT and to
DELE
TE
The
FROM
036 will disappear the route string will be joined less
036 ( deleted from route; not from memory).
When you are finished,
press key to end the editing session and return to the Display
mode. If you press here (which is normally done on other
menus) you will accidently remain in the EDIT screen and continue deleting
waypoints from the route against your will.
3.9.4 Erasing Route Plans
To ERASE a route plan, select the Route mode with P r e s s
the ROUTE MODE Directory. Type in the route number to be erased
and then press the ERASE ROUTE
The message
P
R
ESS
ENTER" will appear. To ERASE the route, I f y o u h a v e a c h a n g e
of heart, abandon the
E
R
ASE
request and return to the Display
mode.
3.10
One of the smallest, but most important keys on the NAV 398 is
key. This key controls access to the screens which set up the operating
parameters for the sensors, the display system, and for the navigation
calculations and readouts,
In the Menu pages you will find that the operations are very simple and
direct and the most difficult task will be to remember which menu holds the
OPERATION 334