Raymarine GPS navigation - Manual (Page 35)

Press this to see a directory of the
memories.
When the LIST page appears, use the
1
(up) (down) numeric
keys (one at a time) to scroll through the memory listings in either direction.
When either key is held down, the scrolling operation speeds up so memories
can be accessed more quickly.
If you want to store a new or edit the existing information of a
selected (highlighted) memory, place the desired memory number
in the highlighted
MEMORY
block. Then press the key. You can
quickly change the name, symbol, or coordinate data of any
memory this way.
3.6.3 Naming Waypoints
As soon as a memory location is selected by one of the methods
available from the Directory, the
NAME
display ap-
pears.
On this display you can select various symbols and/or letters to
the waypoint. The name can consist of up to 8 char-
acters. Each character “selected” at the I
. .
will be used to designate that way-
- - - - - - - -
point on the Plot display. provide a quick
means to select the various characters or symbols for
KEY
FOR NEW ICONS
the name.
1
3
NEXT
Find the desired symbol or character in the groups PRESS ENTER TO CONTINUE
next to the arrows on the screen. If the character is in
the group, press the indicated by the arrow.
The characters in the group will be re-distributed next
to the arrows so you may choose the character
- - - - - - - -
FOR NEW ICONS
If you do not see the character needed for the name,
press the to select new character
3
groups. The groups will appear in pairs as shown in
the figure.
Repeat this operation, selecting characters or symbols and pressing the
softkeys, until the name is completed. To leave a space, you may press the
1
( FWD ) key to skip past a entry prompt or place the character cursor over
OPERATION 3-21