Raymarine GPS navigation - Manual (Page 37)

Enter the Longitude coordinates by typing the numeric value.
Begin with a if the Longitude is less than Press when the
value is correct if the direction is displayed correctly. If
the indicated direction is incorrect, press the for or
Example: Press 1, Long. = W 10.25’
When is pressed, a " CALCULATING " message appears on the
display while the unit is storing the new and then the screen
changes back to the Directory.
you want to enter another waypoint, press NEW
This key returns you to the
NAME
page and advances the
memory number to next available memory. To designate a particu-
lar memory number to continue entries,
ENTER
NO.
If you want to recheck the new entry, key.
Press if you are finished. This will return you back to the previous
display mode.
3.6.4.2. Storing by
To enter the coordinates in Loran-C Time Differences, on the
STORE menu press
Enter the TD 1 coordinate by typing in the nu-
value using all six digits. Press
when the value is OK. 26238.4
Example: Press 1, 0,
=
Enter the TD2 coordinate by typing the numeric
value in using six digits. Press when the TD2 value is OK.
Example: Press 1, TD2 =
is pressed, t h e u n i t w i l l n o w c a l c u l a t e a “ c o r r e c t e d ” L / L
to store as the waypoint. During the calculation process the unit
will display a
" CALCULATING " message on the screen. Please wait for
the message to disappear before continuing.