Raymarine GPS navigation User Manual

Page 40

On the

screen, confirm that the number shown under

ERASE

WAYPOMT

is correct. Also verify that the

Protection feature for

the selected

is OFF. Press the

The

will be erased.

WARNING !

Make sure that the

to be erased is NOT selected as your

current destination. Only waypoints protected “manually” cannot

be accidentally erased.

C. Copying Waypoints
Waypoints can easily be transferred from one memory location to another

using the COPY feature. To Copy waypoints: Press

on the

List. On the Waypoint- SF menu press

When

the

screen appears, press

Then type the

# (from) and

Then press the

# (to) and press

again.

Example:

1, 5,

Wpt

is now copied into wpt

D. Measuring between Waypoints
You can easily measure the bearing and range

between any two waypoints stored in memory
by pressing

COPY

MEASURE

soflkey

on the

SF screen.

the

WAYPOINTS

screen appears, press

key. Then type the number of the “FROM”

and

followed

by the number of the “TO” waypoint. Press

key.

T h e c a l c u l a t e d

bearing and range will then be displayed.

If you want to measure additional points, press

again.

The Fr and To digits will clear and you may re-enter a new pair of numbers.
Press

the new Bearing/Range calculation.

you are finished to return to the

List.

OPERATION 3-26