Raymarine GPS navigation - Manual (Page 58)

3.10.3 System Setups
In the System Set-up menu the type and style of the
various readouts and messages can be set to your prefer-
ence. This menu also controls the Data input/Output
parameters. To see the System menu, from the POS,
NAV, or
screen press On the Main
MenuDirectory,press
MAIN MENU
SETUPS
SIGNAL STATUS
3.10.3.1 Display Type
The first item on the SYSTEM STATUS menu is the NAV DISPLAY TYPE
selection. When
DISPLAY
is pressed, the position
coordinates will be shown in TD coordinates if TD is highlighted. When L/L
is selected, all position coordinates appear in Latitude/ Longitude coordinate
format.
3.10.3.2 Units Menu
When is pressed on the system status menu, a second
menu
SYSTEM UNITS
appears. On this screen the units for distance and speed,
language, and scaling may be selected.
appears again
on the UNITS menu and this
time toggles the selection of
NM/KTS, SM/MPH, or
for distance/speed
units. until the
desired units are highlighted.
Language
Each time
key is pressed one of six
guages may be selected for the
J
UNITS
SYSTEM STATUS
text on displays and in menus. English is the default language. As the key is
pressed
and
ITALIAN
maybeselected.
Scale Range
This menu item sets the span of the scale used on all displays in
CDI, NAV, and POS modes. The selections available are 0.1, 0.3, and 0.5
nm. These are scale limits as measured from to each end. The value
highlighted in the block is the selected value. Press
to highlight your choice.
OPERATION 3-45