Roland Jupiter 80 - Manual (Page 23)

Turning the Power On
23
In
tr
oduc
tion
Pla
ying S
ounds
Editing S
ounds
O
ther C
on
venien
t
Func
tions
Connec
ting O
ther
Equipmen
t
A
ppendix
Once the connections have been completed (p. 20), turn on power to your various devices in the order specified. By turning on devices in the wrong
order, you risk causing malfunction and/or damage to speakers and other devices.
Turning the Power On
* Before switching the power on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound
when switching the power on/off (p. 5). However, this is normal and does not indicate a malfunction.
1.
Minimize the volume of the JUPITER-80 and your speakers .
2.
On the JUPITER-80’s rear panel, turn the [POWER] switch ON .
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
3.
Turn on the power of your speakers .
4.
Use the [VOLUME] knob to adjust the volume appropriately .
Turning the Power Off
1.
Minimize the volume of the JUPITER-80 and your speakers .
2.
Turn off the power of your speakers .
3.
Turn the JUPITER-80’s [POWER] switch OFF .
If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the “Power Supply” (p. 5).
Turning the Power On