Panel descriptions, Top panel – Roland Jupiter 80 User Manual
Page 18
18
Top Panel
1
3
12
10
11
13
9
8
4
7
5
6
2
Number Area
Name
Explanation
Page
1
USB MEMORY
USB MEMORY connector
Connect USB flash memory (available separately) here.
p. 17
2
VOLUME
[VOLUME] knob
Adjusts the volume of the output from the MAIN OUT jacks
and PHONES jack.
p. 23
3
D BEAM
D Beam controller
By moving your hand above the D Beam you can apply
various effects to the sound.
[PITCH] button
If this is on, the D Beam controller will control the pitch.
[VOLUME] button
If this is on, the D Beam controller will control the volume.
[ASSIGNABLE] button
If this is on, the D Beam controller will control the function
you’ve assigned.
4
CONTROL
[HOLD] button
Turns the arpeggiator Hold function on/off.
ARPEGGIO [LOWER ON/OFF] button
If this is on, the arpeggiator will apply to the Lower Part.
ARPEGGIO [UPPER ON/OFF] button
If this is on, the arpeggiator will apply to the Upper Part.
[TEMPO] button
Accesses the tempo screen.
[VISUAL CONTROL] button
Turns MIDI Visual Control on/off. When you press this button
to turn it on, the setting screen will appear.
[HARMONY INTELLIGENCE] button
Turns the Harmony Intelligence function on/off.
[TRANSPOSE] button
By holding down the [TRANSPOSE] button and using the
[-] [+] buttons, you can transpose the keyboard in semitone
steps.
OCTAVE [DOWN] button
Lowers the key range in steps of one octave.
OCTAVE [UP] button
Raises the key range in steps of one octave.
5
PART BALANCE
[LEVEL] slider
Adjust the volume of each Part, or the volume of each layer
in the Live Set. For a SuperNATURAL Synth Tone, these adjust
the AMP level of each Partial.
PART [PERC] button
Turns the Percussion Part, the Live Set layer 1, or a
SuperNATURAL Synth Tone’s Partial 1 on/off.
PART [LOWER] button
Turns the Lower Part, the Live Set layer 2, or a SuperNATU-
RAL Synth Tone’s Partial 2 on/off.
PART [UPPER] button
Turns the Upper Part, the Live Set layer 3, or a SuperNATU-
RAL Synth Tone’s Partial 3 on/off.
PART [SOLO] button
Turns the Solo Part or Live Set layer 4 on/off.
6
Display
Touch screen
Shows various information for the operation you’re
performing, and allows you to control parameters by directly
touching the screen.
p. 27, p. 30–
[MENU] button
Accesses the MENU screen.
p. 29
[E1]–[E4] knobs
Edit the values of the parameters shown in the display.
[SHIFT] button
This is used in conjunction with other buttons to access
setting screens related to those buttons.
Panel Descriptions