Roland Jupiter 80 - Manual (Page 20)

Panel Descriptions
20
Rear Panel Connections
FOOT PEDAL jacks
USB COMPUTER connector
With a USB cable, you can connect
the JUPITER-80 to your computer
(p. 90).
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before
making any connections.
DIGITAL AUDIO OUT (COAXIAL) jack
Connect this to speakers or other devices that are
equipped with a digital input.
This jack outputs the same audio signal as the MAIN
OUT jacks.
Hold jack
Here you can connect a pedal
switch (such as one from the DP
series; sold separately) and use it
as a Hold pedal (p. 48).
CTRL 1, CTRL 2 jacks
Here you can connect an expression pedal (EV-5; sold
separately) and use it to control various parameters or
functions (p. 48).
* Use only the specified expression pedal (EV-5; sold
separately). By connecting any other expression
pedals, you risk causing malfunction and/or
damage to the unit.
AC IN jack
Connect the included AC cord
here.
[POWER] switch
This turns the power on/off (“Turning
the Power On” (p. 23).
MIDI connectors
For connecting MIDI device
(p. 91).