beautypg.com

P. 196), Cosm bass amp (cosm bass guitar amp), 196 insert effect algorithm list – Roland CDX-1 User Manual

Page 196

background image

196

Insert effect algorithm list

11. COSM BASS AMP (COSM Bass Guitar Amp)

This is a multi-effect designed for bass guitar. This features an amp sound that uses a preamp and speaker modeling.

Parameter (full name)

Setting

Function

COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.

Effect On/Off (Effect On/Off)

OFF, ON

This parameter turns the compressor effects on/off.

Sustain (Sustain)

0–100

Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.

Attack (Attack)

0–100

Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.

Level (Output Level)

0–100

Adjusts the volume.

P.AMP (Preamp): Adjust the distortion and tone of the guitar sound.

Effect On/Off (Effect On/Off)

OFF, ON

Turns the preamp effect on/off.

Amp Type (Amp Type) *1

AC

It produces the vintage sound of an early transistor amp.

AMG

It produces the sound of a large double-stack vacuum tube amp with ultra-
lows and a crisp edge.

Volume (Volume)

0–100

Adjusts the volume and distortion of the amp.

Bass (Bass)

-100–+100

Adjusts the tone for the low frequency range.

Middle (Middle)

-100–+100

Adjusts the tone for the middle frequency range.

Treble (Treble)

-100–+100

Adjusts the tone for the high frequency range.

Master (Master)

0–100

Adjusts the volume of the entire preamp.

Bright (Bright) *2

OFF, ON

Turns the bright setting on/off. Bright is switched on to create a lighter and
crisper tone.

Gain (Gain) *3

LOW, MIDDLE, HIGH

Adjusts the distortion of the amp. Distortion will successively increase for
settings of “LOW,” “MIDDLE” and “HIGH.”

*1 When all Bass, Middle and Treble are set to “0,” no sound may be produced depending on the “Amp Type” setting.

*2 Depending on the “Amp Type” setting, this may not be displayed.

*3 successively increase for settings of “LOW,” “MIDDLE” and set to “MIDDLE.” So, normally set it to “MIDDLE.”

Compressor

Equalizer

(*1)

Wah

Noise
Suppressor

Chorus

(*2)

Flanger

Pitch Shifter

Phaser

Doubling

Tremolo/Pan

Delay

*1 Equalizer can be replaced with Wah.

PreAmp

Speaker
Simulator

*2 Chorus can be replaced one of the following effects.