Roland HPi-6 - Manual (Page 52)

52
Adding Variety to Your Performances
fig.splitpoint-e
The split point key is included in the left-hand keyboard area.
1.
Press the [Menu/Lesson] button.
The Menu screen appears.
2.
Press the cursor button to select , then press the [ ]
button.
Split performance is enabled. The tone selected before the performance is set as the
“Right-hand Tone”; the “Left-hand Tone” is selected automatically.
The following screen appears.
Changing Tones
1.
Press the cursor left or right button to select or
.
2.
Press the cursor up or down button to select the tone.
When the tone names of or are highlighted,
you can press the cursor button to select tones within the same tone group.
Changing the Split Point
1.
Press the cursor left or right button to select the keyboard layout
(split point).
Playing Different Sounds in the Right and Left Hand
(Split)
Dividing the keyboard into right-hand and left-hand areas, then playing different sounds in each is called
“Split Performance.” The boundary key is called the “Split Point.”
Split Point (set to F 3, when the power is turned on.)
C1 D1 E1 F1 G1 A1 B1 A0 B0 C2 C3 C4 C5 C8 B7 …
Left-hand Tone Right-hand Tone
Split Point
Displays the key
between the right-hand
and left-hand keyboard
areas.
Left-hand Tone
Displays the name
of the tone selected
for the left-hand
keyboard area. Right-hand Tone
Displays the name of the
tone selected for the
right-hand keyboard
When switching tone groups,
if or hand Tone> is selected, press a
tone button.
You can use the cursor
button to select tones within
the selected tone group.
After changing the tone,
pressing the [ ] button
returns the “Split” screen to
the display.
HPi-6-e.book 52 ページ ２００５年１１月１５日 火曜日 午後３時４９分