Roland HPi-6 - Manual (Page 104)

104
Error Message
Indication Meaning
Error: 1 You can only read the music file. It can not be saved.
Error: 2
An error occurred during writing. The storage media’s protect tab may be in the “Protect” (writing prohibited)
position, or the storage media may not yet be initialized.
Error: 10 No storage media is inserted. Insert the storage media and try again.
Error: 11
There is not sufficient free memory in the save destination. Either insert other storage media or delete
unneeded files and try again.
Error: 14
An error occurred during writing. The storage media may be corrupted. Insert other storage media and try
again. Alternatively, you can initialize the storage media.
Error: 15 The file is unreadable. The data format is not compatible with the HPi-6.
Error: 16
Data was not called up in time for playback of the song. After waiting several seconds, you may be able to play
back the song by pressing the [
(Play/Stop)] button again.
Error: 17 The selected image data cannot be displayed. Prepare image data that can be used with the HPi-6 (p. 83).
Error: 30 The internal memory capacity of the HPi-6 is full.
Error: 40
The HPi-6 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount
of MIDI data sent to the HPi-6.
Error: 41 A MIDI cable has been disconnected. Connect it properly and securely.
Error: 43 A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
Error: 51
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you
have tried several times, contact the Roland service center.
Error: 65
The External Memory connector was subjected to excessive current. Check the storage media to confirm that
no damage has occurred to it.
HPi-6-e.book 104 ページ ２００５年１１月１５日 火曜日 午後３時４９分