Roland Sonar V-Studio VS-700 - Manual (Page 73)

73
RECORD/EDIT Section
O
v
er
vie
w
C
onnec
tions
V
S-700C C
onsole
V
S-700R I/O
F
a
n
tom V
S
A
p
pendix
To Specify the Loop Region
1. Select transport mode (p. 58).
2. Hold down the [SHIFT] button and press the [LOOP] button. The [LOOP] and [ ] buttons will
blink.
3. Use the jog/shuttle and cursor to move to the loop-start point.
4. Press the [ ] button. The [LOOP] and [ ] buttons will blink.
5. Use the jog/shuttle and cursor to move to the loop-end point.
6. Press the [LOOP] button.
To Insert a Marker
1. Use the jog/shuttle and cursor to move to the time at which you want to insert a marker.
2. Press the [MARKER] button.
3. The marker dialog box will appear.
4. As desired, edit the name, the time, and the groove clip pitch.
5. Press the [OK/ENTER] button.
To Access the Marker View
1. Hold down the [COMMAND] button and press the [MARKER] button.
2. The marker view will appear.
To View Marker Information in the Console
1. Hold down the [SHIFT] button and press the [MARKER] button.
2. Marker information will appear in the console.
VS-700_r_e.book 73 ページ ２００８年１１月２０日 木曜日 午後２時２８分