Roland Sonar V-Studio VS-700 - Manual (Page 31)

31
O
v
er
vie
w
C
onnec
tions
V
S-700C C
onsole
V
S-700R I/O
F
a
n
tom V
S
A
p
pendix
CHANNEL STRIP Section
The Channel Strip section provides eight touch sensitive motorized fader strips with identical controls. You use the
channel strips to control up to eight tracks or buses at a time and you can easily switch between different banks of
tracks or buses (refer to “FADER BANK Buttons” (p. 42)). That is, although there are only eight physical channel
strips, you can switch them to control an unlimited number of tracks and buses in your project. The channel strips
always show the status of the current set of eight channels.
The Channel Strip section also provides a single motorized Master fader, which is used to control the level of the
master bus.
You use the [FADER BANK] and [FADER VIEW] buttons to assign tracks and buses to the channel strips (refer to
“FADER BANK Buttons” (p. 42) and “FADER VIEW Buttons (TRACK, BUS, MAIN, I/O CONTROL)” (p. 43)). The
assigned channel strip names are displayed on the LCD displays.
fig.2.eps
A. LCD display (p. 37)
B. Rotary encoder (p. 34)
C. [MUTE] button (p. 34)
D. [SOLO] button (p. 35)
E. [ARM] button (arm for recording) (p. 35)
F. [SEL] button (Select) (p. 36)
G. LED level meter (p. 37)
H. Channel fader (p. 32)
A
B
C
D
E
F
G
H
VS-700_r_e.book 31 ページ ２００８年１１月２０日 木曜日 午後２時２８分