Roland Sonar V-Studio VS-700 - Manual (Page 108)

108
Creating a Patch
Pitch Keyfollow
This specifies the amount of pitch change that will occur
when you play a key one octave higher (i.e., 12 keys upward
on the keyboard).
If you want the pitch to rise one octave as on a conventional
keyboard, set this to “+100.” If you want the pitch to rise two
octaves, set this to “+200.” Conversely, set this to a negative
value if you want the pitch to fall. With a setting of “0,” all
keys will produce the same pitch.
Value: -200, -190, -180, -170, -160, -150, -140, -130, -120,
-110, -100, -90, -80, -70, -60, -50, -40, -30, -20, -10,
0, +10, +20, +30, +40, +50, +60, +70, +80, +90,
+100, +110, +120, +130, +140, +150, +160, +170,
+180, +190, +200
fig.06-030.e
Bend Range Up (Pitch Bend Range Up)
Specifies the degree of pitch change in semitones when the
Pitch Bend lever is all the way right. For example, if this
parameter is set to “12,” the pitch will rise one octave when
the pitch bend lever is moved to the right-most position.
Value: 0– +48
Bend Range Down (Pitch Bend Range Down)
Specifies the degree of pitch change in semitones when the
Pitch Bend lever is all the way left. For example if this is set to
“-48” and you move the pitch bend lever all the way to the
left, the pitch will fall 4 octaves.
Value: -48–0
Patch Pitch Env
(Patch Pitch Envelope)
P-Env Depth (Pitch Envelope Depth)
Adjusts the effect of the Pitch Envelope. Higher settings will
cause the pitch envelope to produce greater change.
Negative (-) settings will invert the shape of the envelope.
Value: -12– +12
P-Env V-Sens (Pitch Envelope Velocity Sensitivity)
Keyboard playing dynamics can be used to control the depth
of the pitch envelope. If you want the pitch envelope to have
more effect for strongly played notes, set this parameter to a
positive (+) value. If you want the pitch envelope to have less
effect for strongly played notes, set this to a negative (-)
value.
Value: -63– +63
P-Env T1 V-Sens
(Pitch Envelope Time 1 Velocity Sensitivity)
This allows keyboard dynamics to affect the Time 1 of the
Pitch envelope. If you want Time 1 to be speeded up for
strongly played notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative
(-) value.
Value: -63– +63
P-Env T4 V-Sens
(Pitch Envelope Time 4 Velocity Sensitivity)
Use this parameter when you want key release speed to
affect the Time 4 value of the pitch envelope. If you want
Time 4 to be speeded up for quickly released notes, set this
parameter to a positive (+) value. If you want it to be slowed
down, set this to a negative (-) value.
Value: -63– +63
P-Env Time KF (Pitch Envelope Time Keyfollow)
Use this setting if you want the pitch envelope times (Time 2–
Time 4) to be affected by the keyboard location. Based on the
pitch envelope times for the C4 key, positive (+) settings will
cause notes higher than C4 to have increasingly shorter
times, and negative (-) settings will cause them to have
increasingly longer times. Larger settings will produce
greater change.
C4 C3 C2 C1 C5 C6 C7
0
+50
+100
+200
-50
-100 -200
Key
Pitch
VS-700_r_e.book 108 ページ ２００８年１１月２０日 木曜日 午後２時２８分