Roland Sonar V-Studio VS-700 User Manual

Page 22

Panel Descriptions

E. DIGITAL 2 OUT Connector

This is an ADAT output connector. You can connect it to an ADAT device and output up to eight channels of audio.

DIGITAL 2 IN Connector

This is an ADAT input connector. It allows up to eight channels of input. The input signals are output directly to the

“VS-700 IN DIGITAL2 1-2” – “VS-700 IN DIGITAL2 7-8” ports of the audio driver.

➔

DIGITAL 1 AES/EBU OUT Connector

This is an AES/EBU format two-channel (stereo) digital output. The same signal is also output to the COAXIAL OUT

connector. This will output the signal of the audio driver’s “VS-700 OUT DIGITAL1” port.

DIGITAL 1 AES/EBU IN Connector

This is an AES/EBU format two-channel (stereo) digital input. This is switched with the COAXIAL IN (S/PDIF)

connector. The input signal is output directly to the audio driver’s “VS-700 IN DIGITAL1” port.

➔

DIGITAL 1 COAXIAL OUT Connector

This is an S/PDIF format two-channel (stereo) digital output. The same signal is also output to the AES/EBU connector.

This will output the signal of the audio driver’s “VS-700 OUT DIGITAL1” port.

DIGITAL 1 COAXIAL IN Connector

This is an S/PDIF format two-channel (stereo) digital input. This is switched with the AES/EBU connector. The input

signal is output directly to the audio driver’s “VS-700 IN DIGITAL1” port.

➔

G. WORDCLOCK IN Connector

This is a WORDCLOCK input connector.

For details on checking and selecting the clock source, refer to

WORDCLOCK OUT Connector

This is a WORDCLOCK output connector. It outputs a clock at all times.

H. OUTPUT 1–10 Jacks

These are ten channels of audio output connectors. They allow a broad range of connections, such as for multi-

output in a surround system, or as sends for outboard effects. These are balanced outputs. They output the signals of

the audio driver’s “1-2 (VS-700)” – “VS-700 OUT 9-10” ports.

VS-700_r_e.book 22 ページ２００８年１１月２０日　木曜日　午後２時２８分