Roland Sonar V-Studio VS-700 - Manual (Page 72)

72
RECORD/EDIT Section
To Specify the Punch Region
1. Select transport mode (p. 58).
2. Hold down the [SHIFT] button and press the [PUNCH] button. The [PUNCH] and [ ] buttons will
blink.
3. Use the jog/shuttle and cursor to move to the punch-in point.
4. Press the [ ] button. The [PUNCH] and [ ] buttons will blink.
5. Use the jog/shuttle and cursor to move to the punch-out point.
6. Press the [PUNCH] button.
To Punch-Record
1. Press the [PUNCH] button. The [PUNCH] button will light.
2. Press the [ARM] button for the track that you want to punch-record. The [ARM] button will light
red.
3. Press the button to start recording.
4. When you’ve finished recording, press the button to stop recording.
To Loop
1. Press the [LOOP] button. The [LOOP] button will light.
VS-700_r_e.book 72 ページ ２００８年１１月２０日 木曜日 午後２時２８分