Riverstone Networks WICT1-12 - Manual (Page 712)

31-8 Riverstone Networks RS Switch Router User Guide Release 8.0
Showing a Service Service Configuration
31.4 SHOWING A SERVICE
31.4.1 Aggregate, Flow-Aggregate, Per-Flow, and Burst-Safe Show Commands
To show these services, use the following commands:
Here is an example:
The fields are:
Service Name – Name of the service displayed.
Rate – Displays the rate limiting rate.
Service Type – Displays the type of service.
Exceed Action – Displays the action taken when the rate is exceeded.
Display an
aggregate, flow-
aggregate, per- flow
or burst-safe
service.
service show rate-limit aggregate
<name |
all
> [
show-applied
]
service show rate-limit flow-aggregate
<name |
all
> [
show-applied
]
service show rate-limit per-flow
<name |
all
> [
show-applied
]
service show rate-limit burst-safe
<name |
all
> [
show-applied
]
! Display an aggregate service
rs# service show rate-limit aggregate testservice2
---------------------------------------------------------------------------------
Service Name: testservice2 Service Type : Aggregate Rate Limit
Rate : 600000000 bps Exceed Action: Drop Packets
---------------------------------------------------------------------------------