Riverstone Networks WICT1-12 - Manual (Page 579)

Riverstone Networks RS Switch Router User Guide Release 8.0 26-17
QoS Configuration Limiting Traffic Rate
To define an aggregate rate limit policy and apply the policy to an interface, use the following commands in the
Configure mode:
Define an aggregate rate limit
policy.
rate-limit
<name>
aggregate acl
<acl list>
rate
<rate-limit>
{
drop-packets | no-action | lower-priority |
lower-priority-except-control | tos-precedence-rewrite
<val1>
| tos-precedence-rewrite-lower-priority
<val2>}
[
allocate-resources during-apply | during-traffic
]
Apply an aggregate rate limit policy
to an interface.
rate-limit
<name>
apply interface
<interface>
| all