Riverstone Networks WICT1-12 - Manual (Page 391)

Riverstone Networks RS Switch Router User Guide Release 8.0 17-83
MPLS Configuration Configuring L2 Tunnels
! If tunnel LSP uses LDP:
mpls add interface to_r2
mpls start
ldp add interface to_r2
ldp start
! Configure IGP (in this example, OSPF is the IGP)
ip-router global set router-id 111.1.1.3
ospf create area backbone
ospf add interface to_r2 to-area backbone
ospf add stub-host 111.1.1.3 to-area backbone cost 5
ospf start