Riverstone Networks WICT1-12 - Manual (Page 166)

9-6 Riverstone Networks RS Switch Router User Guide Release 8.0
Monitoring PoS Ports Packet-over-SONET Configuration Guide
9.5 MONITORING POS PORTS
To display PoS port configuration information, enter one of the following commands in Enable mode:
The following table describes additional monitoring commands for IP interfaces for PoS links, designed to be used in
Enable mode:
9.6 EXAMPLE CONFIGURATIONS
This section shows example configurations for PoS links.
Show framing status, line type, and circuit ID of
the optical link.
sonet show medium
Show working or protecting line, direction, and
switch status.
sonet show aps
Show received path trace.
sonet show pathtrace
Show loopback status.
sonet show loopback
Show alarms and errors on SONET ports.
sonet show alarms
Display bridge NCP statistics for
specified PoS port.
ppp show stats ports
bridge-ncp
Display IP NCP statistics for specified
PoS port.
ppp show stats ports ip-ncp
Display link-status statistics for
specified PoS port.
ppp show stats ports
link-status
Display summary information for
specified PoS port.
ppp show stats ports summary