Riverstone Networks WICT1-12 - Manual (Page 122)

7-10 Riverstone Networks RS Switch Router User Guide Release 8.0
CMTS Configuration Examples CMTS Configuration Guide
7.7 CMTS CONFIGURATION EXAMPLES
The following section contains real-world configurations for broadband network layouts. Each example describes how
to use the RS’ CMTS capabilities to support multiple ISPs. For all examples, assume that there are two ISPs,
AMERILINK and MOONLINK, each with two subscribers.
• AMERILINK
- Ethernet Network: 50.1.0.0
- RF Network: 50.2.0.0
- Server: 50.1.1.100
• MOONLINK
- Ethernet Network: 80.1.0.0
- RF Network: 80.2.0.0
- Server: 80.1.1.100
The configuration for the RS is as follows:
• Slot 1: 8 port 10/100 card
• Slot 5: CMTS card
• AMERILINK Eth interface: 50.1.1.1
• MOONLINK Eth interface: 80.1.1.1
Note The DHCP server software used in these examples is version 2 of the ISC DHCP
Distribution. Please see http://www.isc.org for more details on this server.