Roland VR-760 - Manual (Page 30)

30
Performing with the Keyboard
Changing the Volume Level of Each Part
You can change the volume level of Organ, Piano, Synth, and Rhythm parts.
fig.04-04(VolumeKnobs)
Adding Reverberation to the Sound
The VR-760 can apply a reverb effect. Applying reverb adds pleasing
reverberation to what you play, so it sounds almost as if you were playing
in a concert hall.
You can apply the reverb effect to all parts.
fig.04-05(ReverbSection)
1.
Press the [REVERB TYPE] button to switch the reverb types.
You can select from the following three types.
2.
Turn the [DEPTH] knob to adjust the amount of reverb
effect to be applied.
Rotate fully right: Maximum reverberation.
Rotate fully left: No effect.
Value Explanation
ROOM Simulates the reverberation of a room.
HALL Simulates the reverb of a large concert hall.
CHURCH Simulates the reverberation of a church.
You can adjust how much
of the reverb sound relative
to each part is sent (the
send level). The smaller
this value is, the less
audible the effect is when
you turn the [REVERB
DEPTH] knob.
• Organ’s reverb ( p. 72 )
• Piano’s reverb ( p. 74 )
• Synth’s reverb ( p. 75 )
• Rhythm’s reverb ( p. 70 )