Roland AT15 - Manual (Page 85)

85
Adjusting the Effects
Changing the Reverb Type
You can select from the following 11 types of Reverb:
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Reverb.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Reverb Type.”
fig.11-04
5. Press the Value [-] and [+] buttons to select a
Reverb type.
To return to the basic screen, press the [Utility] button.
Changing the Wall Type
By changing the type of reverb (p. 85) you can experience the
feeling of performing in various different locations, and by
changing the Wall Type (wall material) you can make further
adjustments to the way in which reverberation occurs.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Reverb.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Wall Type.”
fig.11-04
5. Press the Value [-] and [+] buttons to select a Wall
type.
To return to the basic screen, press the [Utility] button.
Setting Descriptions
ROOM 1 Reverberation of a small room
ROOM 2 Reverberation of a small club
ROOM 3 Reverberation of a large room
HALL 1 Reverberation of a large concert hall
HALL 2 Reverberation of a small concert hall
SMALL CHURCH The reverberation of a small church
LARGE CHURCH The reverberation of a large church
CATHEDRAL The reverberation of a cathedral
PLATE A bright, metallic Reverberation
DELAY
An echo-like sound repeated several
times
PAN DELAY
Similarly to the above but where the
sound is panned between the left and
right speakers
Setting Descriptions
DRAPERY Pleated curtain
CARPET Carpet
ACOUSTIC TILE Acoustical tile, sound-absorptive tile
WOOD Wood
BRICK Brick
PLASTER Plaster
CONCRETE
BLOCK
Concrete block
MARBLE Marble
AT-15_e.book 85 ページ ２００５年１月２１日 金曜日 午後８時１４分