Roland AT15 - Manual (Page 40)

40
Using the Rhythm Performance
7.
Press the [Rec] button.
The following screen will be displayed.
8.
If you determine that the rhythm may be deleted, press the
[Rec] button once more.
While the Rhythm is being deleted, the following screen will be displayed.
9.
Press the [Utility] button.
The basic screen reappears.
■ Restoring the Rhythm Stored in the Rhythm
[Disk] Button to the Factory Settings
Use the following procedure to return only the rhythm stored to the Rhythm
[Disk] button to the original factory settings.
1.
Press the [Power On] button to turn off the power (p. 16).
2.
Hold down the Rhythm [Disk] button, and press the [Power
On] switch.
The Rhythm that had been stored in the Rhythm [Disk] button will return to
the factory settings.
To return settings other
than those of the Rhythm
[Disk] button to the factory
settings, use the Panel
Reset operation (p. 18).
AT-15_e.book 40 ページ ２００５年１月２１日 金曜日 午後８時１４分