Roland AT15 - Manual (Page 27)

27
Selecting and Playing Sounds
Transpose the Pitch in Octave Units
(Octave Shift)
The pitch of the sound played by the keyboard can be adjusted in one-octave
steps.
You can apply an Octave shift to the following 5 Parts:
The Upper Organ Part, Upper Orchestral Part
The Lower Part
The Pedal Part
The Solo Part
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] button to select “Octave
Shift.”
f
3.
Press the [Rec] button.
4.
Use the Menu [ ] and [ ] button to select a performance
Part to which you wish to apply an Octave Shift.
Part: Pedal, Lower, U. Organ, U. Orch, Solo
fig.02-16
5.
Use the Value [-] and [+] buttons to set the amount of shift.
The value can be set to a range of +/- 3 octaves.
6.
Press the [Utility] button.
The basic screen reappears.
NOTE
Please note that when you
apply the Octave Shift
function to certain voices,
their pitch could be
stretched beyond their
recommended note ranges,
and they may not sound as
expected. Care should be
taken when using Octave
Shift.
AT-15_e.book 27 ページ ２００５年１月２１日 金曜日 午後８時１４分