Roland AT15 - Manual (Page 73)

73
Record and Playback Your Performance
Saving Performance Songs onto Floppy
Disk
The performance data that you recorded will disappear when the power of
the AT-15 is turned off. If you wish to keep the performance data, you can
save it on a floppy disk.
If the performance data has never been saved to a floppy disk, a “ ”
symbol appears in the display. When the performance data is saved to a
floppy disk, this symbol will no longer be displayed.
fig.08-20
fig.08-19
1.
Insert a floppy disk formatted (p. 70) on the AT-15 into the
disk drive.
2.
Press the [Save] button to save the performance.
3.
Press the Value [-] and [+] button to select the format.
You can select either “ORIGINAL” or “SMF” format.
fig.08-21
ORIGINAL Save data in Atelier format
SMF Saving in SMF Format for Atelier Sound Modules
3
2, 4
You can press the Select [-]
[+] buttons to select the
format for saving the data.
SMF (Standard MIDI File)
is a data format that was
created as a standardized
way to exchange music
data between devices made
by different manufacturers.
AT-15_e.book 73 ページ ２００５年１月２１日 金曜日 午後８時１４分