Roland AT15 User Manual

Page 37

Using the Rhythm Performance

Use the Value [-] and [+] buttons to select where you wish

the selected Rhythm to be stored.

Press the Rhythm [Disk] button to confirm the storage-

destination Rhythm.

While the Rhythm is being loaded into internal memory, the following
screen will be displayed.

fig.03-18

Once the Rhythm has been accommodated in memory, the basic screen
reappears.

❍

If the following screen appears

The following screens appear when a rhythm has already been saved to the
save destination.

fig.03-17

To cancel the procedure, press the [Display/Exit] button.

Press the Rhythm [Disk] button again to start loading the

Rhythm into the internal memory.

NOTE

Never remove the disk or

turn off the power while

the Rhythm data is being

loaded from disk into the

AT-15. If you do so, the

Rhythm data will not be

loaded into the AT-15,

and malfunctions could

result. After returning the

Rhythm stored in the

Rhythm [Disk] button to

the factory settings (see

p. 40), re-load the Rhythm

from disk.

AT-15_e.book 37 ページ２００５年１月２１日　金曜日　午後８時１４分