Roland AT15 - Manual (Page 65)

65
Record and Playback Your Performance
Recording a Performance
You can record the performance that you play. You can also record your
performance while playing rhythms or automatic accompaniment.
fig.08-02
1.
Select the panel settings needed for recording the
performance.
2.
Make sure that a floppy disk is not inserted in the disk drive.
If a floppy disk is in the disk drive, press the Eject button (p. 35) and remove
the floppy disk.
3.
Enter the recording standby mode by pressing the [Rec]
button.
The [Rec] button’s indicator will light. The [Play/Stop] button indicators
will blink.
4.
Press the [Play/Stop] button to start recording.
When you press the [Play/Stop] button, the metronome will play two
measures (bars) of count-in before recording begins.
If you wish to use Rhythm and Automatic Accompaniment as you record,
press the [Start/Stop] button instead of the [Play/Stop] button to begin
recording.
5.
Press the [Play/Stop] button when you have completed your
recording.
4, 5 3
The Play and Stop
functions can both be
assigned to the foot switch.
Each touch of the switch
will alternate the operation
between the Play and Stop
functions (p. 87).
When you press the [Intro/
Ending] button (or [Start/
Stop] button) while
recording a Rhythm
performance or Automatic
Accompaniment, the
Rhythm performance and
Automatic Accompaniment
will stop. However, the
recording itself will
continue. Press the [Play/
Stop] button to stop
recording.
AT-15_e.book 65 ページ ２００５年１月２１日 金曜日 午後８時１４分