Roland AT15 - Manual (Page 23)

23
Selecting and Playing Sounds
■ Selecting the Upper and Lower Voices
Select voices by pressing the Upper and Lower Part buttons.
When the power is turned on, the Upper keyboard will play “Full Organ 3”
and the Lower keyboard will play “Lower Organ2.”
Example: Selecting “Jazz Organ2” for the Upper Organ part,
and “Grand Piano” for the Upper Orchestral part.
1.
Press the Upper Organ [Jazz] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.02-06
Now when you play the Upper keyboard, the “Jazz Organ2” will sound.
2.
Press the Upper Orchestral [Piano] button (the indicator
lights).
Now when you play the Upper keyboard, the two voices “Jazz Organ2” and
“Grand Piano” will sound simultaneously (mixed together).
■ Selecting Pedal Bass Voice
Immediately after the power is turned on, the Pedal Bass voice will sound
single notes using the “Organ Bass1” voice. Here’s how to select Pedal voice
played by the Pedalboard.
1.
Press the Pedal [Organ] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.02-08
Now when you play the Pedalboard, “Organ Bass1” will be heard.
Each time you press the [Alternate] button you will switch between the two
voices which are assigned the button.
Settings can be adjusted to
allow multiple notes to be
played on the Pedalboard
(p. 90).
NOTE
If you press the Pedal [To
Lower] button (indicator
lights p. 46), the Pedal Bass
voice can now be played by
the Lower keyboard, not by
the Pedalboard.
AT-15_e.book 23 ページ ２００５年１月２１日 金曜日 午後８時１４分