Roland AT15 - Manual (Page 71)

71
Record and Playback Your Performance
4.
Press the Menu [ ] and [ ] buttons to select “Disk
Utility.”
fig.08-13
5.
Press the [Rec] button.
6.
Press the Menu [ ] and [ ] buttons to select “Format
Disk.”
7.
Press the [Rec] button.
The following message, asking you to confirm, will be displayed.
fig.08-14
To cancel the procedure, press the [Reset] button.
8.
Press the [Rec] button again to perform the Format.
While formatting is in progress, the following display appears.
fig.08-15
When disk formatting is completed the following screen appears, then basic
screen reappears.
NOTE
Never attempt to remove
the floppy disk until
formatting is complete.
AT-15_e.book 71 ページ ２００５年１月２１日 金曜日 午後８時１４分