Roland AT15 - Manual (Page 84)

84
Adjusting the Effects
Sustain Effect
Sustain allows you to add a Sustain effect or decay to each
voice after the keys are released.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
5. Press the Menu [ ] and [ ] buttons to select
the part whose sustain you wish to adjust.
Keyboard Upper, Lower, Pedal
6. Press the Value [-] and [+] buttons to adjust the
setting.
To return to the basic screen, press the [Utility] button.
Changing the Sustain Length
The sustain length can be set independently (SHORT,
MIDDLE (Medium) or LONG) for the Upper and Lower
keyboards and Bass Pedalboard. You can make a separate
setting for each keyboard.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to select
“Sustain.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Sustain Length.”
fig.11-06
5. Press the Menu [ ] and [ ] buttons to select
the part whose sustain length you wish to adjust.
Keyboard Upper, Lower, Pedal
6. Press the Value [-] and [+] buttons to adjust the
setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Utility] button.
Setting Descriptions
ON The Sustain effect is applied to the voices
OFF The Sustain effect is not applied to the voices
AT-15_e.book 84 ページ ２００５年１月２１日 金曜日 午後８時１４分