Roland RD-700 - Manual (Page 62)

62
Using the RD-700 As a Master Keyboard
Master Keyboard
Adjusting the Volume of Each Part
(MIDI TX Part)
fig.panel
When the [MIDI TX] indicator is on, you can use the PART SWITCH/
LEVEL controls to control the MIDI TX parts in the same way as with the
Local parts (p. 31).
PART SWITCH
When the [MIDI TX] indicator is on, PART SWITCH determines whether or
not MIDI Note messages for each of the MIDI TX parts are transmitted from
MIDI OUT.
When the PART SWITCH indicator for a part is lit (on), MIDI Note messages
are transmitted from MIDI OUT when the keys for that part are played.
When the PART SWITCH indicator for a part is not lighted (off), MIDI Note
messages are not transmitted from MIDI OUT even when the keys for that
part are played.
PART SWITCH will turn on or off each time you press it.
PART LEVEL Slider
When the [MIDI TX] indicator is on, PART LEVEL adjusts the volume level
of each of the MIDI TX parts.
CONTROL
PART LEVEL Slider
PART SWITCH
[MIDI TX] ON
For more on controlling the
Local parts, refer to
“Adjust the Volume Level
for Individual Parts
(PART SWITCH/LEVEL)”
(p. 45).
RD-700_e.book 62 ページ ２００３年１０月２３日 木曜日 午後４時５９分