Roland RD-700 - Manual (Page 55)

55
Using the Convenient Functions in Performances
Convenient Functions
4
Try playing the keyboard.
The settings are switched to those of the Setup that has been called up.
The [RHYTHM] indicator
flashes if you select a setup
that has Intro/Ending set
to ON. Press [RHYTHM] to
start the rhythm with the
Intro.
Selecting Setups Without Pressing [NUM LOCK]
Using the TONE SELECT buttons, you can specify groups of ten Setups at a
time.
1. Press [SETUP], getting the indicator to light.
At this time, turn [NUM LOCK] off.
2. Use the TONE SELECT buttons to specify the Setup number.
Setups are assigned to the TONE SELECT buttons as shown below.
fig.Q1-10
3. Press [DEC/NO] or [INC/YES] to select the Setup.
When [INC/YES] or [DEC/NO] is pressed, the TONE SELECT buttons
included in the selected Setup numbers flash, and the following screen
appears.
fig.LCD
4. Either press the flashing TONE SELECT button or play the keyboard.
The TONE SELECT button stops flashing and remains lit, and the
selected Setup is set.
001
:
010
011
:
020
021
:
030
031
:
040
041
:
050
051
:
060
061
:
070
071
:
080
081
:
090
091
:
100
SETUP
Number
RD-700_e.book 55 ページ ２００３年１０月２３日 木曜日 午後４時５９分