Storing settings to setups ([write]), Stores the current settings to “setup” (p. 56), P. 56) – Roland RD-700 User Manual
Page 56: Keep in setup (p. 56), Up another setup (p. 56)
56
Using the Convenient Functions in Performances
Convenient Functions
Storing Settings to Setups ([WRITE])
When the contents of a Setup are changed, an asterisk (a “*” mark) appears
on the right of the tempo indication. If you want to use the changed content
as a new Setup, use the following procedure to save the settings to a Setup.
You can also change the name of a Setup.
You can store 100 Setups on the RD-700.
fig.panel
1
Press [WRITE], getting the indicator to light.
The Setup screen appears.
fig.LCD
2
Press CURSOR [
] to move the cursor to the destination
Setup name.
3
Select the save-destination Setup, either by pressing [INC/
YES] or [DEC/NO].
When using the TONE SELECT buttons to input Setup numbers, press
[ENTER] afterwards to set the number.
4
Press CURSOR [
] to move the cursor to the new Setup
name.
fig.LCD
CONTROL
1
2,4,8
3,6
3
5
9,10
New Setup Name
Destination
RD-700_e.book 56 ページ ２００３年１０月２３日 木曜日 午後４時５９分