Roland RD-700 - Manual (Page 107)

107
Effect/Parameter List
Appendices
Delay Dev (Pre Delay Deviation)
Pre Delay determines the time from when the direct sound
begins until the processed sound is heard. Pre Delay Deviation
adjusts the differences in Pre Delay between each chorus sound.
Depth Dev (Depth Deviation)
Adjust the difference in modulation depth between each chorus
sound. The shift between the start of each of the chorus sounds
increases as the value is increased.
Pan Dev (Pan Deviation)
Adjust the difference in stereo location between each chorus
sound. With a setting of 0, all chorus sounds will be in the
center. With a setting of 20, each chorus sound will be spaced at
60 degree intervals relative to the center.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct sound
will be output, and with a setting of D0:100W only the chorus
sound will be output.
Level (Output Level)
Adjust the output level.
12: TREMOLO CHO (Tremolo Chorus)
Tremolo Chorus is a chorus effect with added Tremolo (cyclic
modulation of volume).
Pre Delay (Pre Delay Time)
Adjust the time delay from when the direct sound begins until
the chorus sound is heard.
Cho Rate (Chorus Rate)
Adjust the modulation speed of the chorus effect.
Cho Depth (Chorus Depth)
Adjust the modulation depth of the chorus effect.
Phase (Tremolo Phase)
Adjust the spread of the tremolo effect.
Trem Rate (Tremolo Rate) #
Adjust the modulation speed of the tremolo effect.
Trem Sep (Tremolo Separation)
Adjust the spread of the tremolo effect.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
tremolo chorus sound. With a setting of D100:0W only the
direct sound will be output, and with a setting of D0:100W only
the tremolo chorus sound will be output.
Level (Output Level)
Adjust the output level.
13: SPACE-D
Space-D is a multiple chorus that applies two-phase modulation
in stereo. It gives no impression of modulation, but produces a
transparent chorus effect.
Pre Delay (Pre Delay Time)
Adjust the time delay from when the direct sound begins until
the processed sound is heard.
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Phase
Adjust the spatial spread of the sound.
Low Gain
Adjust the gain of the low frequency range.
Positive (+) settings will emphasize (boost) the low frequency
range.
High Gain
Adjust the gain of the high frequency range.
Positive (+) settings will emphasize (boost) the high frequency
range.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct sound
will be output, and with a setting of D0:100W only the chorus
sound will be output.
Level (Output Level)
Adjust the output level.
14: STEREO CHORUS
This is a stereo chorus. A filter is provided so that you can
adjust the timbre of the chorus sound.
Pre Delay (Pre Delay Time)
Adjust the time delay from when the direct sound begins until
the processed sound is heard.
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Phase
Adjust the spatial spread of the sound.
Filter (Filter Type)
Select the type of filter.
OFF : a filter will not be used
LPF : cut the frequency range above the cutoff frequency
HPF : cut the frequency range below the cutoff frequency
Cutoff (Cutoff Frequency)
Adjust the basic frequency of the filter.
Low Gain
Adjust the gain of the low frequency range.
Positive (+) settings will emphasize (boost) the low frequency
range.
High Gain
Adjust the gain of the high frequency range.
Positive (+) settings will emphasize (boost) the high frequency
range.
RD-700_e.book 107 ページ ２００３年１０月２３日 木曜日 午後４時５９分