Nortel Networks 1000BASE-SX - Manual (Page 73)

73
XFP specifications
This section provides technical specifications for the supported 10 Gigabit
SFP (XFP) models. Use these specifications to aid in network design. The
specifications provided here are a subset of the IEEE 802.3ae and 802.3aq
specifications. For more details, see these standards documents. All Nortel
XFPs meet or exceed these standards.
ATTENTION
Nortel recommends that you only use Nortel-qualified XFPs. If you do choose
to use other vendor XFPs, be aware that Nortel does not support the use of
other XFPs.
Information about SFP and XFP power consumption has been added to
Installation—Modules (NN46220-306) in a section entitled "SFPs, XFPs, R
and RC modules, and power consumption".
Navigation
• "XFP labels" (page 73)
• "General XFP specifications" (page 74)
• "10GBASE-SR XFP specifications" (page 74)
• "10GBASE-LR/LW XFP specifications" (page 76)
• "10GBASE-ER/EW XFP specifications" (page 77)
• "10GBASE-ZR/ZW XFP specifications" (page 79)
• "10GBASE DWDM XFP specifications" (page 80)
XFP labels
The Nortel label on a typical XFP contains a Nortel serial number, a bar
code, a manufacturer’s code, an interface type, and a part number.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301 01.01 Standard
5.0 1 May 2008
Copyright © 2008, Nortel Networks
.