Nortel Networks 1000BASE-SX - Manual (Page 27)

Installing an SFP 27
Procedure job aid: locking and extractor mechanisms
Depending on the transceiver manufacturer, your SFP transceiver can have
various types of locking/extractor mechanisms.
The following figures shows a typical mechanisms used on SFP
transceivers; other locking/extractor mechanisms exist, although they are
not shown here. In the figure
Figure 2 "SFP with bail lock and extraction
mechanism" (page 27) , the SFP still has the bore plug installed. Pull the
bail to release the device.
Figure 2
SFP with bail lock and extraction mechanism
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
Figure 3
1000BASE-SX MT-RJ SFP extraction mechanism
The following figure shows the wrap-around latch-type extraction
mechanism. To remove the device, push the collar towards the module.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301 01.01 Standard
5.0 1 May 2008
Copyright © 2008, Nortel Networks
.