Electromagnetic interference compliance – Nortel Networks 1000BASE-SX User Manual
Page 17

Electromagnetic interference compliance
17
ATTENTION
Advertencia:
Los equipos de fibra óptica pueden emitir radiaciones de láser o infrarrojas que
pueden dañar los ojos. No mire nunca en el interior de una fibra óptica ni de
un puerto de conexión. Suponga siempre que los cables de fibra óptica están
conectados a una fuente luminosa.
ATTENTION
Avvertenza:
Le apparecchiature a fibre ottiche emettono raggi laser o infrarossi che possono
risultare dannosi per gli occhi. Non guardare mai direttamente le fibre ottiche o le
porte di collegamento. Tenere in considerazione il fatto che i cavi a fibre ottiche
sono collegati a una sorgente luminosa.
CAUTION
Only qualified technicians should install this equipment.
Place all printed circuit boards on an antistatic mat until you are
ready to install them. If you do not have an antistatic mat, wear
a discharge leash to free yourself of static before touching any of
the printed circuit boards, or free yourself of static by touching a
grounded metal object before you handle a printed circuit board.
Electromagnetic interference compliance
WARNING
Use of controls or adjustments, or performance of procedures
other than those specified herein can result in hazardous radiation
exposure.
The products described in this guide meet requirements of:
FCC Part 15, Subparts A and B, Class A
EN55022: 1998/CISPR22:1997), Class A
General License VDE 0871, Class B
(AmtsblVfg No. 243/1991, Vfg 46/1992) VCCI Class A ITE
EN55024:1998/CISPR24:1997
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301
01.01
Standard
5.0
1 May 2008
Copyright © 2008, Nortel Networks
.