NEC Express 320Lc-R - Manual (Page 93)

Error! Style not defined. 4-49
4. Enter the location, where debug information is to be written, in the text box.
When writing debug information under the file name "MEMORY.DMP" in the D drive:
D:\MEMORY.DMP
This server has the following location as a default value for installation. It is recommendable
to store file in this default location.
%SystemDrive%\NECDump\MEMORY.DMP
IMPORTANT:
[Complete memory dump] should be specified for writing debug information.
However, if the mounted memory size is over 2GB, specify [Kernel Memory
Dump]; you cannot specify [Complete memory dump].
Specify a drive which has a free space of the size of memory in the NEC
Express5800/ft series + 12MB or more.
If the memory will be expanded to larger than 2 GB, change Write Debugging
Information to [Kernel Memory Dump] before expanding the memory. Size of the
debugging information (memory dump) to be collected will change due to memory
increase. Check how much free space the hard disk to which debugging
information is written has.